REAR DIFFERENTIAL LOCK POSITION SWITCH REASSEMBLY

PROCEDURE


  1. INSTALL NO. 1 TRANSFER INDICATOR SWITCH (REAR DIFFERENTIAL LOCK POSITION SWITCH)


    1. B003R34

      Install a new No. 1 transfer indicator switch (rear differential lock position switch) with the bolt.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

  2. INSTALL ELECTRONIC DIFFERENTIAL LOCK CASE SUB-ASSEMBLY

    Click here

  3. INSTALL DIFFERENTIAL BEARING CAP

    Click here

  4. INSTALL WIRING HARNESS CONNECTOR

    Click here

  5. INSPECT TOTAL PRELOAD

    Click here

  6. INSPECT DIFFERENTIAL RING GEAR BACKLASH

    Click here