REAR DIFFERENTIAL LOCK POSITION SWITCH INSPECTION

PROCEDURE


  1. INSPECT NO. 1 TRANSFER INDICATOR SWITCH (REAR DIFFERENTIAL LOCK POSITION SWITCH)


    1. B003P14C01
      *a

      Component without harness connected

      (No. 1 Transfer Indicator Switch (Rear Differential Lock Position Switch))
      B003R2S ON
      B003LF2 OFF

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1(GND) - 2 (RLY2) ON Below 1 Ω
      OFF 10 kΩ or higher

      If the result is not as specified, replace the No. 1 transfer indicator switch (rear differential lock position switch).