REAR DIFFERENTIAL LOCK POSITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE REAR WHEEL

    Click here

  2. REMOVE REAR PROPELLER SHAFT ASSEMBLY


    1. for TMT Made:

      Click here

    2. for TMMIN Made:

      Click here

  3. DRAIN DIFFERENTIAL OIL

    Click here

  4. REMOVE REAR AXLE SHAFT WITH BACKING PLATE LH

    Click here

  5. REMOVE REAR AXLE SHAFT WITH BACKING PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE REAR DIFFERENTIAL PROTECTOR


    1. B003QOX

      Remove the 2 bolts and differential protector from the differential carrier assembly.

  7. REMOVE WIRING HARNESS CLAMP BRACKET


    1. B003KEH

      Disconnect the 3 connectors.

    2. Detach the 2 clamps and remove the wiring harness.

    3. B003P1Z

      Remove the bolt and wiring harness clamp bracket.

  8. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  9. REMOVE REAR DIFFERENTIAL CARRIER GASKET