REAR DIFFERENTIAL LOCK CONTROL SWITCH INSTALLATION

PROCEDURE

1. INSTALL DIFFERENTIAL LOCK SWITCH

   
   

   1. 

      Attach the 2 claws to install the differential lock switch to the lower instrument cover sub-assembly.

   2. Connect the differential lock switch connector.

2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click here

3. INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY

   Click here

4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

5. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   Click here

6. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   Click here

7. INSTALL INSTRUMENT PANEL REGISTER BEZEL GARNISH

   Click here

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

9. CHECK SRS WARNING LIGHT

   Click here

   Click here