EXHAUST GAS TEMPERATURE SENSOR REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here

2. REMOVE EXHAUST GAS TEMPERATURE SENSOR

   CAUTION:

   To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.

   
   

   1. 

      Disconnect the 3 connectors from the 3 exhaust gas temperature sensors.

   2. 

      Remove the nut and disconnect the No. 3 exhaust gas temperature sensor from the No. 1 vacuum pipe.

   3. 

      Remove the bolt and open the clamp of the pipe clamp.

   4. Detach the 3 connectors from the pipe clamp.

   5. 

      Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor from the exhaust manifold converter sub-assembly.

   6. 

      Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor from the exhaust manifold converter sub-assembly.

   7. 

      Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor from the exhaust manifold converter sub-assembly.