FUEL PRESSURE REGULATOR INSTALLATION

PROCEDURE


  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    1. B003MT5C01
      *1 O-Ring

      Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure regulator assembly.

    2. Install the fuel pressure regulator assembly with the 3 bolts.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

    3. Connect the vacuum hose.

    4. Attach the wire harness clamp.

    5. Connect the throttle body connector.

    6. Connect the purge VSV connector.

  2. CONNECT NO. 2 FUEL HOSE

    Click here

  3. INSTALL INTAKE AIR CONNECTOR

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. INSPECT FOR FUEL LEAK

    Click here