FUEL SUPPLY PUMP INSPECTION

PROCEDURE

1. INSPECT SUPPLY PUMP ASSEMBLY

   
   

   1. Inspect the pre-stroke control valve assembly.

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 0.42 to 0.52 Ω

         Tech Tips

         The temperature indicated in "Condition" is the temperature of the pre-stroke control valve.

         If the result is not as specified, replace the supply pump assembly.