FUEL PUMP DISASSEMBLY

CAUTION / NOTICE / HINT

Note

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click here

PROCEDURE


  1. REMOVE FUEL SENDER GAUGE ASSEMBLY

    Click here

  2. REMOVE NO. 1 FUEL SUB-TANK


    1. B003S3S

      Disconnect the fuel pump connector and wire harness.

    2. B003KDM

      Using a small screwdriver, detach the claw on the end of the tube from the claw hole. Disconnect the tube from the clamp.

    3. B003O9M

      Disconnect the fuel tube and wire harness.

    4. B003QFB

      Using a screwdriver, detach the 3 claws from the claw holes.

      Tech Tips

      Tape the screwdriver tip before use.

    5. B003J8E

      Using a screwdriver, detach the 2 claws from the claw holes and remove the No. 1 fuel sub-tank.

      Note

      Do not damage the No. 1 fuel sub-tank.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE FUEL WITH FILTER PUMP ASSEMBLY


    1. B003KA8

      Using a screwdriver, detach the 3 claws from the claw holes and disconnect the fuel pump.

      Tech Tips

      Tape the screwdriver tip before use.

    2. B003Q60

      Disconnect the fuel pump connector and remove the fuel pump harness.

    3. B003OR4C01
      *1 O-Ring
      *2 Spacer

      Remove the O-ring and spacer from the fuel pump.