FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE FAN SHROUD

    Click here

  2. REMOVE CRANKSHAFT PULLEY

    Click here

  3. REMOVE TIMING CHAIN CASE OIL SEAL


    1. B003LI3C01
      *a Protective Tape

      Using a screwdriver, pry out the timing chain case oil seal.

      Note


      • Do not damage the surface of the timing chain case oil seal press fit hole or the crankshaft.

      • Check the crankshaft for damage after removing the timing chain case oil seal. If the crankshaft is damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.