REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE MANUAL TRANSMISSION UNIT ASSEMBLY

    Click here

  2. REMOVE CLUTCH COVER ASSEMBLY

    Click here

  3. REMOVE CLUTCH DISC ASSEMBLY

    Click here

  4. REMOVE FLYWHEEL SUB-ASSEMBLY

    Click here

  5. REMOVE REAR END PLATE

    Click here

  6. REMOVE REAR ENGINE OIL SEAL


    1. B003MX3C01
      *a Cut Position

      Using a knife, cut off the lip of the rear engine oil seal.

    2. Using a cloth and screwdriver, pry out the rear engine oil seal from the rear engine oil seal retainer.

      Note

      Be careful not to damage the crankshaft and rear engine oil seal retainer.

      Tech Tips


      • After removal, check the crankshaft for damage. If damaged, smooth the surface with #400 sandpaper.

      • Tape the screwdriver tip before use.