AIR INJECTION DRIVER(w/ Secondary Air Injection System) REMOVAL

PROCEDURE


  1. REMOVE AIR INJECTION CONTROL DRIVER WITH BRACKET


    1. B003KPCC01
      *A for LHD
      *B for RHD

      Disconnect the 2 air injection control driver connectors.

    2. Detach the wire harness clamp.

    3. Remove the bolt and disconnect the body ground from the bracket.

    4. Remove the 2 bolts and air injection control driver with bracket.

  2. REMOVE AIR INJECTION CONTROL DRIVER


    1. B003JDWC01
      *A for LHD
      *B for RHD

      Remove the 2 screws and air injection control driver from the air injection control bracket.