AIR PUMP(w/ Secondary Air Injection System) REMOVAL

PROCEDURE


  1. REMOVE FRONT UPPER FENDER APRON SEAL RH

    Click here

  2. DISCONNECT FRONT FENDER LINER RH


    1. Remove the 6 clips and 3 screws and disconnect the front fender liner RH from the front bumper cover and body panel.

      Tech Tips

      It is not necessary to fully remove the front fender liner RH. Partially remove it so that the air pump assembly with bracket can be removed.

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE

    Click here

  4. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  6. REMOVE AIR PUMP INLET


    1. B003LUG

      Remove the bolt and disconnect the air pump inlet.

    2. Remove the No. 1 air injection system hose from the air pump inlet pipe.

    3. Remove the air pump inlet from the No. 1 air injection system hose.

  7. REMOVE NO. 4 AIR INJECTION SYSTEM HOSE


    1. B003REH

      Remove the hose clamp from the No. 4 air injection system hose and radiator hose inlet.

    2. B003S23

      Slide the 2 clips and disconnect the No. 4 air injection system hose from the air switching valve assembly and air pump inlet pipe.

  8. REMOVE AIR PUMP ASSEMBLY WITH BRACKET


    1. B003MOV

      Disconnect the air pump connector.

    2. Detach the clamp and disconnect the wire harness.

    3. B003KJP

      Disconnect the No. 2 air injection system hose from the air pump inlet pipe.

    4. Slide the clip and disconnect the No. 3 air injection system hose from the air pump inlet pipe.

    5. B003JE9

      Remove the 3 bolts and air pump assembly with bracket.

  9. REMOVE AIR PUMP INLET PIPE


    1. B003KQL

      Remove the 2 bolts and air pump inlet pipe from the body panel.

  10. REMOVE AIR PUMP ASSEMBLY


    1. B003PCEC01
      *1 No. 2 Air Injection System Hose
      *2 No. 3 Air Injection System Hose
      *3 Hose Clamp

      Remove the hose clamp from the No. 3 air injection system hose and wire harness.

    2. Slide the clip and disconnect the No. 3 air injection system hose from the air pump assembly.

    3. Remove the No. 2 air injection system hose from the air pump assembly.

    4. B003KG6C01
      *1 Air Pump Assembly
      *2 Air Pump Bracket
      B003R2S Air Pump Insulator

      Detach the 3 fittings of the air pump insulators and remove the air pump assembly from the air pump bracket.