EXHAUST MANIFOLD W/ TURBOCHARGER REASSEMBLY

PROCEDURE

1. INSTALL TURBOCHARGER NOZZLE VANE CONTROL ACTUATOR

   
   

   1. Install the turbocharger nozzle vane control actuator with the 3 bolts.

      Torque:

      12.3 N*m  { 125 kgf*cm, 9 ft.*lbf }

2. INSTALL TURBOCHARGER VANE CONTROL ROD SUB-ASSEMBLY

   
   

   1. Install the turbocharger vane control rod sub-assembly.

   2. Install 2 new E-washers to the variable nozzle vane motor assembly and turbocharger vane control link sub-assembly.

      Note

      Do not reuse the E-washer.