IGNITION COIL AND SPARK PLUG REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the ignition coil assembly or spark plug removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link

  • Replacement of spark plug

  • Replacement of ignition coil assembly

 Inspection After Repair Poor idle, engine start, etc.

Click here

PROCEDURE


  1. REMOVE IGNITION COIL ASSEMBLY

    B003QCK

    1. Disconnect the 4 ignition coil connectors.

    2. Remove the 4 bolts and pull out the 4 ignition coil assemblies.

  2. REMOVE SPARK PLUG


    1. Using a 16 mm spark plug wrench, remove the 4 spark plugs.