CRANKSHAFT POSITION SENSOR INSPECTION

PROCEDURE


  1. INSPECT CRANKSHAFT POSITION SENSOR


    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Cold 19 to 32 Ω
      1 - 2 Hot 24 to 37 Ω

      Note

      In the chart above, the terms "Cold" and "Hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). Hot means approximately 50 to 100°C (122 to 212°F).

      If the result is not as specified, replace the crankshaft position sensor.