DIESEL THROTTLE BODY REMOVAL

PROCEDURE


  1. REMOVE NO. 1 AIR CLEANER HOSE


    1. B003QM7

      Disconnect the connector from the intake air temperature sensor.

    2. Loosen the 2 clamps.

    3. Remove the No. 1 air cleaner hose from the air cleaner cap sub-assembly and intake pipe.

  2. REMOVE INTAKE PIPE


    1. B003PC3

      Remove the 2 bolts.

    2. Loosen the hose clamp and remove the intake pipe from the intake flange.

  3. REMOVE INTAKE FLANGE

    B003M4Q

    1. Remove the bolt and disconnect the heater water hose from the intake flange.

    2. B003J6H

      Disconnect the connector from the manifold absolute pressure sensor.

    3. B003P42

      Slide the clamp and disconnect the PCV hose from the intake flange.

    4. Remove the 3 nuts, intake flange and gasket from the venturi assembly.

  4. REMOVE VENTURI ASSEMBLY


    1. B003LHC

      Disconnect the 2 connectors from the venturi assembly.

    2. Remove the venturi assembly and gasket from the intake manifold.