DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Viscous Heater)

  2. REMOVE VISCOUS HEATER V BELT (w/ Viscous Heater)


    1. B003LRP

      Loosen the 2 bolts and nut.

    2. B003L5I

      Turn the bolt to loosen the viscous heater V belt and reduce the tension. Then remove the viscous heater V belt.

  3. REMOVE FAN AND GENERATOR V BELT


    1. B003MFZC01
      *a Service Hole
      *b Pin

      While turning the V-ribbed belt tensioner assembly clockwise, align the service holes of the V-ribbed belt tensioner assembly, and then insert a pin with a diameter of 5.0 mm (0.197 in.) into the service holes to fix the V-ribbed belt tensioner assembly in place.

    2. Remove the fan and generator V belt.