ENGINE GENERAL MAINTENANCE

CAUTION / NOTICE / HINT

PROCEDURE

1. INSPECT DRIVE BELT

   Type	See procedure
   1GD-FTV	Click here

2. REPLACE ENGINE OIL AND OIL FILTER

   Type	See procedure
   1GD-FTV	Click here

3. INSPECT COOLING AND HEATER SYSTEM

   
   

   1. Check that the radiator, condenser and/or intercooler is not blocked with leaves, dirt or insects, and clean them if necessary. Also check the hose connection for the installation condition, corrosion, etc.

4. INSPECT ENGINE COOLANT

   Type	See procedure
   1GD-FTV	Click here

5. REPLACE ENGINE COOLANT

   Type	See procedure
   1GD-FTV	Click here

6. INSPECT EXHAUST PIPES AND MOUNTINGS

   
   

   1. Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.

7. INSPECT BATTERY ELECTROLYTE LEVEL

   Type	See procedure
   1GD-FTV	Click here

8. INSPECT WATER SEDIMENT ACCUMULATOR

   Type	See procedure
   1GD-FTV	Click here

9. INSPECT AIR CLEANER FILTER

   
   

   1. Remove the air cleaner filter.

      Note

      Do not start the engine with the air cleaner filter removed, as this may damage the engine.

   2. Visually check that the air cleaner filter is not excessively damaged or oily. If necessary, replace the air cleaner filter with a new one.

   3. If cleaning an air cleaner filter element, blow compressed air to clean it.

      Note

      When using an air cleaner filter that uses compressed air, wear safety glasses and a dust mask in order to protect your health.

      Tech Tips

      When an excessive amount of dirt is present, replace the air cleaner filter element.

   4. Reinstall the air cleaner filter.

10. INSPECT FUEL TANK CAP GASKET

    Type	See procedure
    1GD-FTV	Click here

11. INSPECT FUEL LINES, FUEL LINE CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BAND

    
    

    1. Visually check the fuel lines and hoses for cracks, leakage, loose connections and deformation. Also, visually check the tank band for looseness.