DOOR LOCK SERVICE DATA

FRONT DOOR LOCK ASSEMBLY RH
Connector Condition Tester Connection Condition Specified Condition
Component without harness connected 7 (LSSR) - 8 (E) Lock 10 kΩ or higher
Unlock Below 1 Ω
6 (L) - 8 (E) Held to lock side
Neutral 10 kΩ or higher
5 (UL) - 8 (E) Held to unlock side Below 1 Ω
FRONT DOOR LOCK ASSEMBLY LH
Connector Condition Tester Connection Condition Specified Condition
Component without harness connected 7 (E) - 8 (LSSR) Lock 10 kΩ or higher
Unlock Below 1 Ω
REAR DOOR LOCK ASSEMBLY RH
Connector Condition Tester Connection Condition Specified Condition
Component without harness connected 6 (LSSR) - 9 (E) Lock 10 kΩ or higher
Unlock Below 1 Ω
REAR DOOR LOCK ASSEMBLY LH
Connector Condition Tester Connection Condition Specified Condition
Component without harness connected 6 (LSSR) - 9 (E) Lock 10 kΩ or higher
Unlock Below 1 Ω
BACK DOOR LOCK (w/o Power Back Door)
Connector Condition Tester Connection Condition Specified Condition
Component without harness connected 1 (ACT-) - 3 (D+) Lock 10 kΩ or higher
Unlock Below 1 Ω
BACK DOOR LOCK (w/ Power Back Door)
Connector Condition Tester Connection Condition Specified Condition
Component without harness connected 3 (CLS) - 1 (E) Open position Below 1 Ω
Open position → Half-latch position Below 1 Ω → 10 kΩ or higher
Half-latch position 10 kΩ or higher
Full-latch position
Overstroke position
1 (E) - 4 (CTY) Open position Below 1 Ω
Half-latch position
Half-latch position → Full-latch position Below 1 Ω → 10 kΩ or higher
Full-latch position 10 kΩ or higher
Overstroke position
2 (FSW) - 1 (E) Open position
Open position → Half-latch position 10 kΩ or higher → Below 1 Ω → 10 kΩ or higher
Half-latch position 10 kΩ or higher
Half-latch position → Full-latch position 10 kΩ or higher → Below 1 Ω → 10 kΩ or higher
Full-latch position 10 kΩ or higher
Overstroke position
6 (OPN) - 3 (E)

Sector gear in neutral position

(Sector switch on)

Below 1 Ω

Sector gear not in neutral position

(Sector switch off)

10 kΩ or higher
DOOR CONTROL RELAY
Connector Condition Tester Connection Condition Specified Condition
- 3 - 4 Battery voltage is not applied to terminals 1 and 2 Below 1 Ω
Battery voltage is applied to terminals 1 and 2 10 kΩ or higher
3 - 5 Battery voltage is not applied to terminals 1 and 2
Battery voltage is applied to terminals 1 and 2 Below 1 Ω
DOOR CONTROL BATTERY
Connector Condition Tester Connection Condition Specified Condition
Component without harness connected 5(BATB) - 11(DRLY) Voltage is not applied between terminals 8 (IG) and 9 (ACTG) 10 kΩ or higher
Voltage is applied between terminals 8 (IG) and 9 (ACTG) Below 1 Ω