1GD-FTV BATTERY / CHARGING TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Retainer plate x Generator drive end frame
2.3 N*m
23 kgf*cm
20 in.*lbf
Generator coil assembly x Generator drive end frame
5.6 N*m
57 kgf*cm
50 in.*lbf
Generator brush holder assembly x Generator coil assembly
1.8 N*m
18 kgf*cm
16 in.*lbf
Generator rear end cover x Generator coil assembly
4.6 N*m
47 kgf*cm
41 in.*lbf
Generator pulley with clutch x Generator rotor assembly without SST
110.5 N*m
1127 kgf*cm
81 ft.*lbf
with SST
88.4 N*m
901 kgf*cm
65 ft.*lbf
Generator assembly x Generator bracket
8.4 N*m
86 kgf*cm
74 in.*lbf
Generator assembly x Cylinder block
43 N*m
438 kgf*cm
32 ft.*lbf
Generator wire x Terminal B
9.8 N*m
100 kgf*cm
87 in.*lbf
Battery clamp sub-assembly x Battery clamp bolt
5.4 N*m
55 kgf*cm
48 in.*lbf
Positive (+) cable x Positive (+) battery terminal
5.4 N*m
55 kgf*cm
48 in.*lbf
Negative (-) cable x Negative (-) battery terminal
5.4 N*m
55 kgf*cm
48 in.*lbf