ПЕРВИЧНЫЙ ВАЛ РАЗБОРКА

PROCEDURE


  1. REMOVE INPUT SHAFT BEARING


    1. Remove the input shaft bearing from the input shaft.

  2. REMOVE FRONT BEARING SHAFT SNAP RING


    1. Using a snap ring expander, remove the front bearing shaft snap ring from the input shaft.

  3. REMOVE INPUT SHAFT FRONT BEARING


    1. A01LFPKN01

      Using SST and a press, press out the input shaft front bearing from the input shaft.

      SST
      09950-00020

  4. INSPECT NO. 2 SYNCHRONIZER RING

    Click here