ГЕНЕРАТОР (для моделей с силой тока 80A) УСТАНОВКА

PROCEDURE

1. INSTALL GENERATOR ASSEMBLY

   
   

   1. Install the generator assembly with the 2 bolts.

      Torque:

      43 N*m  { 438 kgf*cm, 32 ft.*lbf }

   2. Connect the wire harness to terminal B with the nut.

      Torque:

      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

   3. Install the generator bracket with the bolt.

      Torque:

      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

   4. Install the terminal cap.

   5. Connect the generator connector.

2. INSTALL FAN AND GENERATOR V BELT

   Click here

3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

4. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

   Click here

5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE

   Click here

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here