ЖГУТ ЭЛЕКТРОПРОВОДКИ ТРАНСМИССИИ ПРОВЕРКА

PROCEDURE


  1. INSPECT TRANSMISSION WIRE (ATF TEMPERATURE SENSOR)

    A01LA0PC60
    *a

    Component without harness connected

    (Transmission Wire)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection ATF Temperature Specified Condition
      2 (OT-) - 10 (OT+) Always 79 Ω to 156 kΩ
      2 (OT-) - Body ground Always 10 kΩ or higher
      10 (OT+) - Body ground Always 10 kΩ or higher
      1 (OT2-) - 9 (OT2+) Always 25 Ω to 156 kΩ
      1 (OT2-) - Body ground Always 10 kΩ or higher
      9 (OT2+) - Body ground Always 10 kΩ or higher

      Tech Tips

      If the resistance is out of the specified range at any of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.

      Resistance (Reference)
      ATF Temperature Specified Condition
      10°C (50°F) 5 to 8 kΩ
      25°C (77°F) 2.5 to 4.5 kΩ
      110°C (230°F) 0.22 to 0.28 kΩ

      If the result is not as specified, replace the transmission wire.