ЗАМОК ЗАЖИГАНИЯ ПРОВЕРКА

PROCEDURE


  1. INSPECT IGNITION SWITCH ASSEMBLY


    1. A01SABXC01
      *a

      Component without harness connected

      (Ignition Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      - LOCK 10 kΩ or higher
      7 (ACC) - 5 (AM1) ACC Below 1 Ω

      8 (IG1) - 5 (AM1)

      7 (ACC) - 5 (AM1)

      4 (AM2) - 3 (IG2)

      		 ON Below 1 Ω

      8 (IG1) - 5 (AM1)

      6 (ST1) - 5 (AM1)

      4 (AM2) - 3 (IG2)

      4 (AM2) - 2 (ST2)

      		 START Below 1 Ω

      If the result is not as specified, replace the ignition switch assembly.