ТЕРМОСТАТ УСТАНОВКА

PROCEDURE

1. INSTALL WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

   
   

   1. Install a new gasket to the water inlet sub-assembly with thermostat.

   2. Install the water inlet sub-assembly with thermostat to the water inlet assembly with the 3 nuts.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

2. CONNECT RADIATOR HOSE OUTLET

   
   

   1. Connect the radiator hose outlet to the water inlet sub-assembly with thermostat, and slide the hose clamp to secure the hose.

      Note

      Connect the radiator hose outlet so that the paint mark on the radiator hose outlet is aligned with the protrusions of the water inlet sub-assembly with thermostat.

      Click here

3. ADD ENGINE COOLANT

   Click here

4. INSPECT FOR COOLANT LEAK

   Click here

5. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY (for 4WD)

   Click here