ВПУСКНОЙ КОЛЛЕКТОР УСТАНОВКА

PROCEDURE


  1. INSTALL INTAKE MANIFOLD


    1. A01SBI8C01
      *a Protrusion
      B0027PX Upward

      Install a new gasket to the cylinder head sub-assembly with the protrusion facing upward.

    2. A01SDRLC01
      B0027PX Bolt
      B0027QD Nut

      Install the intake manifold with the 6 bolts and 2 nuts. Uniformly tighten the bolts and nuts in several steps.

      Torque:
      23.5 N*m  { 240 kgf*cm, 17 ft.*lbf }

  2. INSTALL INJECTION PIPE SUB-ASSEMBLY

    Click here

  3. INSTALL NO. 1 GLOW PLUG CONNECTOR

    Click here

  4. INSTALL WIRE HARNESS CLAMP BRACKET


    1. Install the wire harness clamp bracket with the bolt.

      Torque:
      13.5 N*m  { 138 kgf*cm, 10 ft.*lbf }

    2. Attach the wire harness clamp.

    3. Install the wire harness clamp bracket with the 2 bolts.

      Torque:
      13.5 N*m  { 138 kgf*cm, 10 ft.*lbf }

    4. Attach the 2 wire harness clamps to the wire harness clamp bracket.

  5. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE


    1. Apply a light coat of engine oil to a new O-ring.

    2. Install the O-ring to the engine oil level dipstick guide.

    3. A01SDS5N01

      Install the engine oil level dipstick guide with the 2 bolts.

      Torque:
      for bolt A
      23.5 N*m  { 240 kgf*cm, 17 ft.*lbf }
      for bolt B
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }

    4. Install the engine oil level dipstick.

  6. INSTALL VENTURI ASSEMBLY

    Click here

  7. INSPECT FOR FUEL LEAK

    Click here