ЭЛЕКТРОННЫЙ БЛОК ПРИВОДА ФОРСУНОК СНЯТИЕ

PROCEDURE


  1. REMOVE INJECTOR DRIVER ASSEMBLY


    1. for LHD:


      1. A01LG2B

        Disconnect the 3 injector driver connectors from the injector driver.

      2. Remove the 2 bolts and injector driver assembly from the body.

    2. for RHD:


      1. A01LDPI

        Disconnect the 3 injector driver connectors from the injector driver.

      2. Detach the clamp and disconnect the wire harness from the injector driver bracket.

      3. Remove the 2 bolts and injector driver assembly from the body.

  2. REMOVE INJECTOR DRIVER BRACKET


    1. for LHD:


      1. A01L9IV

        Remove the 3 screws and injector driver bracket from the injector driver.

    2. for RHD:


      1. A01LE38

        Remove the 4 screws and 2 injector driver brackets from the injector driver.