ДЕМПФЕР ПУЛЬСАЦИЙ ДАВЛЕНИЯ В ТОПЛИВНОЙ СИСТЕМЕ СНЯТИЕ

PROCEDURE


  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE INTAKE AIR SURGE TANK

    Click here

  5. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY


    1. B0028YAC01
      *1 Fuel Pressure Regulator Holder

      Remove the fuel pressure regulator holder from the fuel pressure pulsation damper assembly.

    2. Pull the fuel pressure pulsation damper assembly out of the fuel delivery pipe sub-assembly.

    3. Remove the O-ring from the fuel pressure pulsation damper assembly.