ТЕРМОСТАТ СНЯТИЕ

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE PCV HOSE HEAT INSULATOR

    Click here

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE

    Click here

  4. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  6. DISCONNECT NO. 2 RADIATOR HOSE


    1. Disconnect the No. 2 radiator hose from the water inlet.

  7. REMOVE WATER INLET

    B002796

    1. Remove the bolt and disconnect the wire harness from the water inlet.

    2. Remove the 3 bolts and water inlet.

  8. REMOVE THERMOSTAT


    1. Remove the thermostat from the cylinder block.

    2. Remove the gasket from the thermostat.