ДАТЧИК ПОЛОЖЕНИЯ КОЛЕНЧАТОГО ВАЛА СНЯТИЕ

PROCEDURE


  1. REMOVE FAN AND GENERATOR V BELT (w/ Air Conditioning System)

    Click here

  2. REMOVE FRONT UPPER FENDER APRON SEAL LH (w/ Air Conditioning System)

    Click here

  3. DISCONNECT COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)


    1. A01SCLO

      Remove the bolt and disconnect the suction hose sub-assembly from the engine.

    2. A01SERQ

      Disconnect the cooler compressor connector.

    3. Remove the 2 bolts and 2 nuts.

    4. A01SD3D

      Using an E8 "TORX" socket wrench, remove the 2 stud bolts and disconnect the cooler compressor assembly.

    5. Support the cooler compressor assembly securely.

      Tech Tips

      It is not necessary to completely remove the cooler compressor assembly. With the hoses connected to the cooler compressor assembly, hang the cooler compressor assembly on the vehicle body with a rope.

  4. REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET (w/ Air Conditioning System)

    Click here

  5. REMOVE CRANKSHAFT POSITION SENSOR


    1. A01SEO8

      Disconnect the crankshaft position sensor connector.

    2. Disconnect the crankshaft position sensor connector from the connector bracket.

    3. Detach the harness clamp.

    4. Remove the bolt and crankshaft position sensor.