ДАТЧИК ДЕТОНАЦИИ УСТАНОВКА

PROCEDURE


  1. INSTALL KNOCK SENSOR

    Tech Tips

    Perform "Inspection After Repairs" after replacing the knock sensor.

    Click here


    1. A01WBAEC01
      *a Upper
      *b Front

      Install the knock sensor with the bolt.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      Make sure that the knock sensor is at the correct angle when installing it.

    2. Connect the knock sensor connector.

  2. INSTALL INTAKE MANIFOLD

    Click here