ECM УСТАНОВКА

PROCEDURE

1. INSTALL NO. 2 ECM BRACKET

   
   

   1. Install the No. 2 ECM bracket with the 2 screws.

      Torque:

      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

2. INSTALL NO. 1 ECM BRACKET

   
   

   1. Install the No. 1 ECM bracket with the 2 screws.

      Torque:

      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

3. INSTALL ECM

   
   

   1. Install the ECM, No. 1 and No. 2 ECM bracket with the bolt and 2 nuts.

      Torque:

      for bolt

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      for nut

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Connect the 4 ECM connectors and clamp.

4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

5. PERFORM REGISTRATION

   Click here

   Tech Tips

   Only perform registration when the ECM is replaced, either by itself or in any of the following combinations.

   
   

   • ECM and Fuel Supply Pump

   • ECM and Diesel Throttle Body Assembly

   • ECM and Injector Assembly

   • ECM and Engine Assembly

6. START ENGINE

   Click here