ПЕРЕДНИЙ САЛЬНИК КОЛЕНЧАТОГО ВАЛА УСТАНОВКА

PROCEDURE


  1. INSTALL FRONT CRANKSHAFT OIL SEAL


    1. Apply MP grease to the lip of a new front crankshaft oil seal.

    2. A01W8W1C02
      *a -0.5 to 0.5 mm (-0.0197 to 0.0197 in.) (from the timing chain cover edge)

      Using SST and a hammer, tap in the oil seal until its surface is flush with the timing chain cover edge.

      Standard
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.) (from the timing chain cover edge)
      SST
      09226-10010

      Note


      • Keep the lip of the oil seal free from foreign matter.

      • Do not tap in the oil seal at an angle.

  2. INSTALL CRANKSHAFT PULLEY

    Click here

  3. INSTALL RADIATOR ASSEMBLY

    Click here

  4. INSPECT FOR OIL LEAK

    Click here