КАТУШКА ЗАЖИГАНИЯ И СВЕЧА ЗАЖИГАНИЯ СНЯТИЕ

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the ignition coil assembly or spark plug removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link

  • Replacement of spark plug

  • Replacement of ignition coil assembly

 Inspection After Repair Poor idle, engine start, etc.

Click here

PROCEDURE


  1. REMOVE NO. 2 SURGE TANK STAY


    1. A01SBX0

      Remove the 2 bolts and No. 2 surge tank stay.

  2. REMOVE IGNITION COIL ASSEMBLY


    1. Disconnect the 6 ignition coil connectors.

    2. A01L82C

      Remove the 6 bolts and 6 ignition coil assemblies.

  3. REMOVE SPARK PLUG


    1. Remove the 6 spark plugs.