ENGINE HOOD MOULDING(for ALPHARD) REASSEMBLY

PROCEDURE


  1. INSTALL FRONT HOOD MOULDING PAD

    Tech Tips

    When installing the front hood moulding pad, heat the front hood moulding assembly using a heat light.

    Standard
    Item Temperature
    Front Hood Moulding Assembly 20 to 30°C (68 to 86°F)

    1. Clean the front hood moulding assembly surface.


      1. Using a heat light, heat the front hood moulding assembly surface.

      2. Remove the double-sided tape from the front hood moulding assembly.

      3. Wipe off any tape adhesive residue with cleaner.

    2. B006QO5C02
      *a Standard Position

      Install a new front hood moulding pad.


      1. Using a heat light, heat the front hood moulding assembly.

      2. Remove the peeling paper from the face of the front hood moulding pad.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Align the front hood moulding pad as shown in the illustration.

        Tech Tips

        Press the front hood moulding pad firmly to install it.