REAR SPOILER REASSEMBLY

PROCEDURE


  1. INSTALL REAR SPOILER NO. 1 SEAL

    Tech Tips

    When installing the rear spoiler No. 1 seal, heat the rear spoiler using a heat light.

    Standard
    Item Temperature
    Rear Spoiler 20 to 30°C (68 to 86°F)

    1. Clean the rear spoiler surface.


      1. Using a heat light, heat the rear spoiler surface.

      2. Remove the double-sided tape from the rear spoiler.

      3. Wipe off any tape adhesive residue with cleaner.

    2. B006PWGC02
      *a Mark-off Line

      Install a new rear spoiler No. 1 seal.


      1. Using a heat light, heat the rear spoiler.

      2. Remove the peeling paper from the face of the rear spoiler No. 1 seal.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Align the rear spoiler No. 1 seal with the mark-off line of the rear spoiler, and then install it.

        Tech Tips

        Press the rear spoiler No. 1 seal firmly to install it.

  2. INSTALL CENTER STOP LIGHT CORD ASSEMBLY

    Click here

  3. INSTALL CENTER STOP LIGHT ASSEMBLY

    Click here

  4. INSTALL REAR WASHER NOZZLE AND HOSE ASSEMBLY

    Click here