REAR BUMPER INSTALLATION

PROCEDURE


  1. INSTALL REAR WHEEL OPENING EXTENSION LH


    1. B006LD4C05
      *a Clip A
      *b Clip B

      Install clip B together with the rear wheel opening extension LH.

    2. Install the 2 clips labeled A.

  2. INSTALL REAR WHEEL OPENING EXTENSION RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REAR BUMPER SIDE SUPPORT LH


    1. B006MV4C03
      B006N8A Install in this Direction

      Attach the claw to install the rear bumper side support LH as shown in the illustration.

    2. Install the 3 clips.

  4. INSTALL REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL REAR BUMPER NO. 1 SIDE SUPPORT LH


    1. B006MLFC02
      B006N8A Install in this Direction

      Attach the claw to install the rear bumper No. 1 side support LH as shown in the illustration.

    2. Install the 3 clips.

  6. INSTALL REAR BUMPER NO. 1 SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL REAR BUMPER UPPER COVER LH


    1. B006NNBC02
      B006N8A Install in this Direction

      Attach the claw to install the rear bumper upper cover LH as shown in the illustration.

    2. Install the 2 screws.

  8. INSTALL REAR BUMPER UPPER COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH


    1. for ALPHARD:

      Click here

    2. for VELLFIRE:

      Click here

  10. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH


    1. for ALPHARD:

      Click here

    2. for VELLFIRE:

      Click here

  11. INSTALL REAR BUMPER ENERGY ABSORBER RH (w/ Energy Absorber)


    1. B006L9P

      Install the rear bumper energy absorber RH with the clip.

  12. INSTALL REAR BUMPER PROTECTOR RH (w/ Energy Absorber)


    1. B006MMA

      Install the rear bumper protector RH with the 3 clips.

  13. INSTALL REAR BUMPER PROTECTOR LH (w/ Energy Absorber)


    1. B006QTK

      Install the rear bumper protector LH with the 3 clips.

  14. INSTALL REAR BUMPER ENERGY ABSORBER LH (w/ Energy Absorber)


    1. B006OH5

      Install the rear bumper energy absorber LH with the clip.

  15. INSTALL REAR BUMPER COVER


    1. Connect the connector.

    2. B006OUJC02
      B006N8A Install in this Direction

      Attach the claw to install the rear bumper cover as shown in the illustration.

    3. B006PMBC02
      B006N8A Install in this Direction

      Attach the claw as shown in illustration.

      Tech Tips

      Use the same procedure to install the claw on the other side.

    4. Using a T30 "TORX" socket wrench, install the 2 rear bumper cushions.

    5. Remove the protective tape.

    6. B006N3E

      Attach the claw.

      Tech Tips

      Use the same procedure to install the claw on the other side.

    7. Install the clip.

      Tech Tips

      Use the same procedure to install the clip on the other side.

    8. B006MYXC04
      *A for Cold Area Specification Vehicles

      except Cold Area Specification Vehicles:

      Install the 7 clips.

    9. for Cold Area Specification Vehicles:

      Install the 9 clips.