REAR BUMPER REASSEMBLY

PROCEDURE


  1. INSTALL REFLEX REFLECTOR ASSEMBLY LH


    1. B006MTIC02
      B006N8A Install in this Direction

      Attach the guide to install the reflex reflector assembly LH as shown in the illustration.

    2. B006LCG

      Install the screw.

  2. INSTALL REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REAR BUMPER PLATE LH


    1. A01IIOW

      Connect the fall prevention hook.

    2. B006O44C02
      B006N8A Install in this Direction

      Attach the claw to install the rear bumper plate LH as shown in the illustration.

  4. INSTALL REAR BUMPER PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL NO. 2 LUGGAGE ROOM WIRE


    1. Attach the clamp to install the No. 2 luggage room wire.

      A01IGAP

  6. INSTALL NO. 3 ULTRASONIC SENSOR

    Click here

  7. INSTALL NO. 2 ULTRASONIC SENSOR

    Click here