REAR BUMPER DISASSEMBLY

PROCEDURE


  1. REMOVE ULTRASONIC SENSOR CLIP

    Click here

  2. REMOVE REAR CORNER ULTRASONIC SENSOR

    Click here

  3. REMOVE REAR CENTER ULTRASONIC SENSOR

    Click here

  4. REMOVE REAR CORNER ULTRASONIC SENSOR RETAINER

    Click here

  5. REMOVE REAR CENTER ULTRASONIC SENSOR RETAINER

    Click here

  6. REMOVE NO. 2 LUGGAGE ROOM WIRE


    1. Detach the clamp and remove the No. 2 luggage room wire.

      B006LKT

  7. REMOVE REAR BUMPER MOULDING (w/ Rear Under Spoiler)


    1. Remove the 15 clips and rear bumper moulding as shown in the illustration.

      B006MI8C01
      B006N8A Remove in this Direction - -

  8. REMOVE REAR SPOILER NO. 1 PROTECTOR (w/ Rear Under Spoiler)


    1. B006MG0

      Remove the rear spoiler No. 1 protector.

  9. REMOVE REAR BUMPER PLATE LH


    1. B006RADC02
      B006N8A Remove in this Direction

      Detach the claw as shown in the illustration.

    2. B006Q5XC01
      B006QOD Fall Prevention Hook

      Disconnect the fall prevention hook and remove the rear bumper plate LH.

  10. REMOVE REAR BUMPER PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. REMOVE REFLEX REFLECTOR ASSEMBLY LH


    1. B006LCG

      Remove the screw.

    2. B006N2BC02
      B006N8AC07 Remove in this Direction

      Detach the guide and remove the reflex reflector assembly LH as shown in the illustration.

  12. REMOVE REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.