FRONT BUMPER(for VELLFIRE) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

   Click here

2. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

   Click here

3. INSTALL FRONT BUMPER SIDE SUPPORT LH

   
   

   1. 

      Install in this Direction

      Attach the claw to install the front bumper side support LH.

   2. Insttall the clip.

   3. Insttall the bolt.

4. INSTALL FRONT BUMPER SIDE SUPPORT RH

   Tech Tips

   Use the same procedure described for the LH side.

5. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

   
   

   1. 

      Install the front bumper reinforcement sub-assembly with the 8 bolts.

      Torque:

      66 N*m  { 673 kgf*cm, 49 ft.*lbf }

6. INSTALL HOOD LOCK SUPPORT BRACE SUB-ASSEMBLY

   Click here

7. INSTALL THERMISTOR ASSEMBLY

   Click here

8. INSTALL FRONT BUMPER ENERGY ABSORBER

   
   

   1. 

      Install in this Direction

      Install the front bumper energy absorber as shown in the illustration.

9. INSTALL FRONT BUMPER COVER

   
   

   1. Attach the guide to install the front bumper cover.

   2. Connect the connector.

      
   3. 

      Install in this Direction

      Attach the claw as shown in the illustration.

   4. 

      Install in this Direction

      Attach the claw as shown in the illustration.

   5. Install the 3 clips and 2 bolts.

      

   6. Remove the protective tape.

   7. 

      Install the 4 clips and 2 screws.

   8. 

      *a	CORRECT
      *b	INCORRECT

      Install the 2 pin hold clips.

      Tech Tips

      Use the same procedure for the pin hold clip on the other side.

   9. Install the clip.

      Tech Tips

      Use the same procedure for the clip on the other side.

10. INSTALL RADIATOR GRILLE

    Click here

11. INSTALL RADIATOR COVER SUB-ASSEMBLY

    Click here

12. ADJUST FOG LIGHT AIMING

    Click here