FRONT BUMPER(for VELLFIRE) DISASSEMBLY

PROCEDURE


  1. REMOVE ULTRASONIC SENSOR CLIP

    Click here

  2. REMOVE FRONT CORNER ULTRASONIC SENSOR

    Click here

  3. REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER

    Click here

  4. REMOVE FOG LIGHT ASSEMBLY LH

    Click here

  5. REMOVE FOG LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE NO. 4 ENGINE ROOM WIRE


    1. Detach the clamp and remove the No. 4 engine room wire.

      B006Q1B

  7. REMOVE FOG LIGHT MOUNTING BRACKET LH


    1. B006KT4C01
      B006N8A Remove in this Direction

      Remove the 3 screws.

    2. Remove the fog light mounting bracket LH as shown in the illustration.

  8. REMOVE FOG LIGHT MOUNTING BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. REMOVE FRONT BUMPER HOLE COVER ASSEMBLY LH


    1. B006MHBC03
      B006N8A Remove in this Direction

      Detach the claw and remove the front bumper hole cover assembly LH as shown in the illustration.

  10. REMOVE FRONT BUMPER HOLE COVER ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. REMOVE FRONT BUMPER HOLE COVER LH


    1. B006MLCC03
      B006N8A Remove in this Direction

      Detach the clip and remove the front bumper hole cover LH as shown in the illustration.

  12. REMOVE FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  13. REMOVE FRONT BUMPER GARNISH


    1. Remove the 4 screws.

    2. Detach the claw, guide and remove the front bumper garnish as shown in the illustration.

      B006N6B

  14. REMOVE LOWER NO. 1 RADIATOR GRILLE


    1. Detach the claw and remove the lower No. 1 radiator grille.

      B006ONB