FRONT BUMPER(for VELLFIRE) DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 2 ULTRASONIC SENSOR

    Click here

  2. REMOVE FOG LIGHT ASSEMBLY LH

    Click here

  3. REMOVE FOG LIGHT ASSEMBLY RH

    Click here

  4. REMOVE NO. 4 ENGINE ROOM WIRE


    1. Detach the clip and remove the No. 4 engine room wire.

      A01IL62

  5. REMOVE FRONT BUMPER HOLE COVER ASSEMBLY LH


    1. A01IF8YC03
      B006N8A Remove in this Direction

      Using a screwdriver, detach the claw and remove the front bumper hole cover assembly LH as shown in the illustration.

  6. REMOVE FRONT BUMPER HOLE COVER ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. REMOVE FRONT BUMPER HOLE COVER LH


    1. A01IHIAC03
      B006N8A Remove in this Direction

      Detach the claw as shown in the illustration.

    2. A01IGKU

      Disconnect the fall prevention hook and remove the front bumper hole cover LH.

  8. REMOVE FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. REMOVE LOWER NO. 1 RADIATOR GRILLE


    1. Using a screwdriver, detach the claw and remove the lower No. 1 radiataor grille.

      A01IIO1