FRONT BUMPER(for ALPHARD) REASSEMBLY

PROCEDURE


  1. INSTALL LOWER NO. 1 RADIATOR GRILLE


    1. Attach the claw to install the lower No. 1 radiator grille.

      A01IJQV

    2. Install the 4 clips.

      A01IHU2

  2. INSTALL FRONT BUMPER HOLE COVER LH


    1. A01IIZW

      Connect the fall prevention hook.

    2. A01IJJDC03
      B006N8A Install in this Direction

      Attach the claw to install the front bumper hole cover LH as shown in the illustration.

  3. INSTALL FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. INSTALL FRONT BUMPER HOLE COVER ASSEMBLY LH


    1. A01IGWZC03
      B006N8A Install in this Direction

      Attach the claw to install the front bumper hole cover assembly LH as shown in the illustration.

  5. INSTALL FRONT BUMPER HOLE COVER ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. INSTALL FOG LIGHT MOUNTING BRACKET LH


    1. A01IFO4C01
      B006N8A Install in this Direction

      Attach the guide to install fog light mounting bracket LH as shown in the illustration.

    2. Install the 2 screws.

  7. INSTALL FOG LIGHT MOUNTING BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. INSTALL NO. 4 ENGINE ROOM WIRE


    1. Attach the clamp to install the No. 4 engine room wire.

      A01IHNB

  9. INSTALL FOG LIGHT ASSEMBLY LH


    1. for Bulb Type:

      Click here

    2. for LED Type:

      Click here

  10. INSTALL FOG LIGHT ASSEMBLY RH


    1. for Bulb Type:

      Click here

    2. for LED Type:

      Click here

  11. INSTALL NO. 2 ULTRASONIC SENSOR

    Click here

  12. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ Bracket)


    1. A01IFTX

      Attach the guide to install the front bumper extension mounting bracket.

    2. A01IL0J

      Attach the claw.

    3. Install the 2 screws.