FRONT BUMPER(for ALPHARD) DISASSEMBLY

PROCEDURE


  1. REMOVE ULTRASONIC SENSOR CLIP

    Click here

  2. REMOVE FRONT CORNER ULTRASONIC SENSOR

    Click here

  3. REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER

    Click here

  4. REMOVE FOG LIGHT ASSEMBLY LH

    Click here

  5. REMOVE FOG LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE NO. 4 ENGINE ROOM WIRE


    1. Detach the clamp and remove the No. 4 engine room wire.

      B006QD8

  7. REMOVE FOG LIGHT MOUNTING BRACKET LH


    1. B006NHLC03
      B006N8A Remove in this Direction

      Remove the 3 screws.

    2. Remove the fog light mounting bracket LH as shown in the illustration.

  8. REMOVE FOG LIGHT MOUNTING BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. REMOVE FRONT BUMPER HOLE COVER ASSEMBLY LH


    1. B006PUVC02
      B006N8A Remove in this Direction

      Detach the claw and remove the front bumper hole cover assembly LH as shown in the illustration.

  10. REMOVE FRONT BUMPER HOLE COVER ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. REMOVE FRONT BUMPER HOLE COVER LH


    1. B006KQYC03
      B006N8A Remove in this Direction

      Detach the claw as shown in the illustration.

    2. B006N3XC03
      B006QOD Fall Prevention Hook

      Disconnect the fall prevention hook and remove the front bumper hole cover LH.

  12. REMOVE FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  13. REMOVE RADIATOR GRILLE SIDE MOULDING LH


    1. B006QCEC02
      B006N8A Remove in this Direction

      Remove the 3 screws.

    2. Detach the clip, guide and remove the radiator grille side moulding LH.

  14. REMOVE RADIATOR GRILLE SIDE MOULDING RH

    Tech Tips

    Use the same procedure described for the LH side.

  15. REMOVE LOWER NO. 1 RADIATOR GRILLE


    1. Detach the claw, guide and remove the lower No. 1 radiator grille.

      B006OBP

  16. REMOVE FRONT BUMPER PAD


    1. B006NZV

      Remove the front bumper pad.

      Tech Tips

      Use the same procedure for the other side.