STOP LIGHT SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE COWL SIDE TRIM BOARD LH (for LHD)

    Click here

  2. REMOVE COWL SIDE TRIM BOARD RH (for RHD)

    Click here

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    for LHD:

    Click here

    for RHD:

    Click here

  4. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. B006MD9

      Disconnect the connector.

    2. Turn the stop light switch assembly counterclockwise and remove it.

  5. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER


    1. B006P4HC01
      B006PCE Protective Tape

      Using a screwdriver, detach the claw and remove the stop light switch mounting adjuster.

      Note

      The stop light switch mounting adjuster must not be reused.

      Tech Tips

      Tape the screwdriver tip before use.