LICENSE PLATE LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE BACK DOOR CENTER GARNISH

    Click here

  2. REMOVE BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH LH (w/o Power Back Door)

    Click here

  4. REMOVE BACK DOOR SIDE GARNISH LH (w/ Power Back Door)

    Click here

  5. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  6. REMOVE BACK DOOR INSIDE HANDLE

    Click here

  7. REMOVE SWITCH BEZEL (w/ Power Back Door)

    Click here

  8. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  9. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    for ALPHARD:

    Click here

    for VELLFIRE:

    Click here

  10. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

  11. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    1. B006OAH

      Disconnect the connector.

    2. Detach the claw and remove the license plate light assembly LH.