LICENSE PLATE LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT LICENSE PLATE LIGHT ASSEMBLY (for LH Side)


    1. A01IFYPC39
      *a

      Component without harness connected

      (License Plate Light Assembly)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → U11-1 (B)

      Battery negative (-) → U11-2 (E)

      		 License plate light illuminates

      If the result is not as specified, replace the license plate light assembly.

  2. INSPECT LICENSE PLATE LIGHT ASSEMBLY (for RH Side)


    1. A01IFYPC40
      *a

      Component without harness connected

      (License Plate Light Assembly)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → U3-1 (B)

      Battery negative (-) → U3-2 (E)

      		 License plate light illuminates

      If the result is not as specified, replace the license plate light assembly.