HORN INSPECTION

PROCEDURE


  1. INSPECT HIGH PITCHED HORN ASSEMBLY


    1. A01IJVHC15
      *a

      Component without harness connected

      (High Pitched Horn Assembly)

      Apply battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Body ground

      		 High pitched horn sounds

      If the result is not as specified, replace the high pitched horn assembly.

  2. INSPECT LOW PITCHED HORN ASSEMBLY


    1. A01IKX3C17
      *a

      Component without harness connected

      (Low Pitched Horn Assembly)

      Apply battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Body ground

      		 Low pitched horn sounds

      If the result is not as specified, replace the low pitched horn assembly.