HORN REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures(adjustment, calibration,initialization, or registration) that must be performed after parts are removed, installed, or replaced during the high pitched horn assembly and low pitched horn assembly installation/removal are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative Functions when not Performed Link

  • Removal/Installation of the front television camera assembly or the radiator grille assembly

 Television camera view adjustment Panoramic view monitor system

Click here

PROCEDURE


  1. REMOVE RADIATOR COVER SUB-ASSEMBLY


    1. for ALPHARD:

      Click here

    2. for VELLFIRE:

      Click here

  2. REMOVE RADIATOR GRILLE


    1. for ALPHARD:

      Click here

    2. for VELLFIRE:

      Click here

  3. REMOVE HIGH PITCHED HORN ASSEMBLY


    1. A01IG0I

      Disconnect the connector.

    2. Remove the bolt and high pitched horn assembly.

  4. REMOVE LOW PITCHED HORN ASSEMBLY


    1. A01IHDR

      Disconnect the connector.

    2. Remove the bolt and low pitched horn assembly.