REAR LIGHT ASSEMBLY(for ALPHARD) REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR LIGHT SOCKET AND WIRE LH


    1. B006LVWC01
      B006N8A Install in this Direction

      Attach the claw to connect the connector.

    2. B006OG0

      Connect the connector.

  2. INSTALL REAR LIGHT LED


    1. B006LXQC01
      *a Matchmark
      *b Lock Position Mark
      B006N8A Clockwise

      Set the rear light LED into place, and then turn the rear light LED clockwise until the lock position mark.

    2. B006N49

      Connect the connector.

  3. INSTALL REAR LIGHT GASKET LH


    1. B006OR4

      Install a new rear light gasket LH.